Most rain barrels on the market don't fully utilize the water they hold because the spigot is located about halfway up the barrel. This is to allow buckets to be filled, but leaves about a quarter of the water behind. And this remaining water is standing which can be hazardous. Barrels with optimally located spigots don't allow room for buckets and leave only hoses as the draining option. The Rain Wizard Urn Stand solves these issues by lifting and supporting the Rain Wizard Urn or Rain Wizard Urn 50 rain barrel off the ground. With increased elevation, the barrel can drain at a much faster rate. And any filling device can be easily placed below the spigot without awkward tilting or maneuvering.
The stand is conveniently labeled on the top area so you know which side to use with which barrel. Simply flip it over to change its compatibility. The structured core is designed to hold over 750 lbs. of water weight, more than enough for what your barrel would collect. And the specially raised support area creates a perfect fit for your Rain Wizard Urn style rain barrel. Don't use unsightly cinder blocks or spend lots of money on decorative bricks or wooden structures. The Rain Wizard Urn Stand will match the fine curves and fluting of your existing barrel without breaking the bank.